Skip to content

Available 24/7/365       Call or Text 813.247.3620 Contact Us

Available 24/7/365 813.247.3620

Davis logo

Choosing a Weigh Shark® Belt Scale: Models, Speed Sensors and the Add-Ons That Matter

The fastest way to choose a belt scale is to look at the conveyor first. Your frame and idlers usually make the decision, and the add-ons follow from how the numbers will be used.

Weigh Shark® belt scales are designed and built by MCR Technologies Group in Sterling, Illinois. Davis Industrial distributes, installs and services them. Here's how the lineup fits together.

The control box: Weigh Shark 2

Every scale needs an integrator, and MCR's current model is the Weigh Shark 2. Highlights:

  • 7-inch color touchscreen, plus physical buttons
  • Dual 32-bit processors
  • 3-port Ethernet switch; Modbus TCP/IP, MQTT and an HTTP web server
  • RS-232 and RS-485 serial ports; a 4–20 mA current loop; 4 digital inputs and 4 outputs
  • USB host for data export and in-field software updates
  • 8 weight accumulators, 4 languages, 5 unit options
  • Short tons, metric tons or pounds per hour

If you're running the original Weigh Shark — small screen and keypad — see the upgrade section below.

The six scale models

Standard Troughing (CEMA B, C, D). About 80% of what MCR sells. The weigh bridge is two separate assemblies, each with one load cell, bolted to each side of the conveyor frame. The idler's mounting feet are removed and the idler sits on the load cells. Standard load cells come in 150, 250 and 500 capacities. Single-idler accuracy is ±1%, with ½%, ¼% and ⅛% options by adding weigh bridges.

HD (CEMA E & F). A heavy-duty single-idler scale with four load cells and a heavy-duty mounting plate connecting the two assemblies. The idler mounts through a heavy-duty V-block, which eliminates torque from the idler sitting over the load cells.

Wing B & C. Built for portable plants, track stackers and other mobile equipment. Wing C mounts on C-channel frame supports; Wing B on side-discharge conveyors with tube frames. It's a bolt-on: no welding or cutting and no belt removal, with adjustable widths and calibration brackets attached. The model (C2 through C5) is selected by a single measurement — the "X dimension," bolt hole to bolt hole on the frame. One honest note: on portable equipment, accuracy can be lower depending on the load and installation.

CIT (Channel Insert Idlers). For conveyors using channel insert idlers. The bracket depends on the idler manufacturer, model and troughing angle, so those three details are required to quote.

Garland. For three- to five-roll idlers hanging from chain or cable. The scale bolts outside the frame and the chain attaches to the load cell — one of the simplest installs in the lineup.

kW Electric. A different approach entirely: it measures amp draw from the drive motor. No load cells, no speed sensor, no moving parts and no calibration weights. Installation takes about an hour by your electrician, and accuracy is rated at ±1%. A good fit where mounting a weigh bridge isn't practical.

Options across the line include stainless steel construction and low-temperature stainless load cells rated from −60°F to 125°F (standard load cells are temperature-compensated from 14°F to 122°F).

Speed sensors

  • Heavy-duty speed wheel (2023 design). A 7.5-inch wheel on a heavy-duty aluminum tube, standard on troughing scales. The larger wheel doubled bearing life. It retrofits onto older scales at no price premium where there's clearance.
  • Compact wing speed sensor. For portable equipment where clearance between the top and return belt is tight. Repair kits — wheel, bearing and proximity switch — keep existing sensors running.
  • Magnetic shaft encoder. Mounts on a pulley, preferably the head pulley. The right choice for wet sand, corrosive or sticky material that would build up on a wheel.

All speed sensors ship with 50 feet of cable; longer runs can be built at the factory before shipping.

Add-ons that solve real problems

These can be added at purchase or years later.

  • Angle compensator. Required when a conveyor's operating angle changes — a stacker that raises, lowers or swings side to side. Without it, every move throws the scale out of calibration. A fixed incline doesn't need one.
  • Calibration kits. Bracket-and-weight kits for troughing and wing scales, for when a material test isn't practical.
  • Scoreboard signs. Large displays that flash current rate and totals where loader operators can see them. Wired or wireless.
  • Remote display. 7-inch or 10-inch screen that consolidates up to 16 scales, connected by pre-programmed radios or CAT5 cable. Export daily production by USB.
  • AggLink. MCR's cloud platform: live production, historical totals, year-over-year comparisons, charts, inventory and downtime on any phone, tablet or computer. A single scale can connect with a cellular modem. Multiple scales are usually more economical through one remote display with one connection — or the plant's own network. MCR sets up user profiles and logins.
  • Ticket printers, truck load-out and a protective metal control box for specific applications.

Already have a Weigh Shark?

MCR stopped selling the original Weigh Shark control box new at the start of 2026, and replacement components are available only while supplies last. The WS1 → WS2 upgrade program converts your existing box to a Weigh Shark 2 for less than a new control box. Downtime runs about two to three days, so many plants buy one spare Weigh Shark 2, swap it in, send the old box for conversion and rotate it to the next conveyor.

Existing scales can also be upgraded in place: heavier load cells when the material changes, additional weigh bridges for tighter accuracy, and the heavy-duty speed sensor.

Backed by the manufacturer

MCR keeps standard models in stock and ships within 24 hours, covers parts with a two-year limited warranty, and offers free call-in technical support.

How to get the right one

Send us a completed belt scale application form — material, belt width and speed, idler type and spacing, maximum and minimum tons per hour, whether the angle changes, accuracy needed and power source — plus a photo of the idler and the stretch of conveyor you have in mind. We'll size it with MCR, recommend the location, and install it with the matched idlers it needs.

Ask your Davis rep for the application form, or schedule a free site walk at conveyors247.com · 813-247-3620.