Skip to content

Available 24/7/365       Call or Text 813.247.3620 Contact Us

Available 24/7/365 813.247.3620

logo
logo-footer

Pulley Re-Lagging

Conveyor pulley lagging is a protective covering applied to the surface of a conveyor pulley to enhance its grip and durability. Davis Industrial offers pulley lagging services, enhancing the performance, ensuring optimal traction, reducing wear, and extending conveyor system lifespan.

Pulley Re-Lagging by Davis Industrial

Davis Industrial provides and installs all types of pulley lagging on all sizes and types of pulleys. In most cases, lagging services can be provided on-site without even cutting the belt or removing the pulley. Davis Industrial's expert technicians can also replace your pulley and refurbish the used pulley as a spare in one of our various Florida facilities. We offer weld-on, cold bond as well as hot bonded - autoclaved lagging options. Pickup and delivery as well as fast turnaround services are all available for your convenience. Quality is key and at Davis Industrial, we do not take shortcuts.

Lagging for Drum Conveyor Pulleys

Herringbone Groove Lagging

This style grooving is where the points do not meet in the middle. This is normally used in drive pulleys, with the V pointing in the direction of rotation. (3/8”minimum thickness)

Chevron Groove Lagging

Providing the same functionality as Herringbone grove lagging. (3/8” minimum thickness)

Diamond Groove Lagging

Diamond or double chevron is primarily used for reversing conveyor drive pulleys. It is also often used for spare pulleys when direction of rotation has not yet been identified. (3/8” minimum thickness

Ceramic Lagging

Ceramic lagging is ceramic tiles molded into a rubber compound. Providing for excellent traction, reducing slippage and offering excellent abrasion resistance.

Circumferential Groove Lagging

This is used on non-drive pulleys for really wet applicationsor cold temperatures, which allows the lagging to deflect,keeping material from building up on the lagging.(3/8” minimum thickness)

Aligner Groove Lagging

This is style of lagging and is used on flat face pulleys. The lagging is machined flat, then grooves are machined inat an angle. This results in a training action. As the rubber iscompressed by the belt, the lagging will deflect towards thecenter, helping to track the belt. (3/4” normal thickness)

EZ Lag

Craft-Lag and EZ lag are field replaceable lagging. Craft-Lagis bonded to rigid backing, then formed to a specificdiameter. Craft-Lag can be used with or without retainersand is ideal for mining, crushed stone, sand and gravel,cement, agriculture, food processing, coal mining, powerplants, feed and grain and general industry.

Vulcanized Engineered Ceramic Lagging

The uniquely designed tiles are then embedded in the vulcanized lagging.This design eliminates seams, where failures often start. This process allows flexibility in tile coverage and grooving patterns as well.
Quality is key

The Benefits of Pulley Re-Lagging

Improved Traction
Pulley lagging enhances the traction between the pulley and the conveyor belt, reducing slippage and ensuring that the belt runs smoothly and efficiently.
Enhanced Performance

Overall, pulley lagging improves the performance of the conveyor system, leading to smoother operation, better belt tracking, reduced maintenance requirements, and increased productivity.

Extended Pulley Life
The lagging material acts as a protective layer, reducing wear and tear on the pulley surface, and extending the life of the pulley.
Need a new pulley instead? Take a look at our options.

Ready to enhance your operations?